Extruder OEE

Flexible shaping for different products
Extruder OEE
Extruder OEE overview
Amandus Kahl Extruder OEE is equipped at the outlet with a hydraulic ram. The die can be extended into and withdrawn from the outlet case by exact control of this ram. Machine power is regulated by extension of the hydraulic ram which can be quickly withdrawn in the event of over current. The die change is carried out by means of hydraulic actuation thus is quick and efficient. The knife head is provided with a separate drive and remains in its position during the die change. At the start of the production, the KAHL extruder OEE does not require an increased water addition and can be started with an “open” die. It is less sensitive and the quantity of wasted product is reduced considerably compared to traditional extruders.
extruder sample
■ Starch modification of 80 to 90 % acc. to the amyloglucosidose method (AMG).
■ High water-binding ability of 200 to 300 %.
■ Dimensionally stable pellets at high water content, e.g. if the pellets are to be soaked for increasing the water consumption of the animals.
■ Bulk density: 350 to 450 g/l.
■ Different product shapes, e.g. round, oval, cloverleaf, bone etc.
■ Pellets without fines.
■ High fat contents of 20 – 30 % for high-energy feed possiblem